Since 1989, we have supported our customers by providing learning supports which are regularly upgraded and which incorporate the latest technologies. We also support the training of their personnel and the education of the young trainees who will develop their businesses in the future.
-
Details
USB-Muxdiag-2 (Evo) Compact USB interface for CAN / LIN...
The USB-MUXDIAG-2 (Evo) is a compact communication interface which is particularly well suited to the vehicle environment.
-
Details
USB/ETHERNET unit
The USB-MUX-4C4L unit is a 2nd generation USB unit belonging to the EXXOTEST® range of "Analysis tools for on-board...
-
Details
Adjusting advanced driver assist systems
A professional multi-manufacturer solution for calibrating the various driver assist systems.
-
Details
Smoke generator for the reliable identification of the location...
SLD-Tool provides reliable assistance in identifying the location of leaks from almost every vehicle system, including from within the...
-
Details
TPMS diagnostic tool
The Tyre Pressure Management Tool, or "TPM-Tool", provides an attractively priced, compact and effective solution for garages in terms...
-
Details
Multibrand diagnostics tool
Gutmann multi-manufacturer diagnostics tool. 10.4" TFT touch screen, mains power supply, integrated rechargeable battery.
-
Details
Software for viewing and analysing electrical signals.
REFLET is a simple and user-friendly app used to view and analyse electrical signals.
-
Details
Measurement acquisition system
REFLET8 can simultaneous acquire data from 12 slow channels and 4 fast channels.
It is used in conjunction with... -
Details
5-channel relay test unit
For testing 5-channel relays with 6 mm terminals. Ideal for checking the control and power functions of the relay,...
-
Details
Table on casters for Exxo-Modules type model
Table on casters for Exxo-Modules type model
-
Details
Table on casters for EXXOTEST® model
Table on casters for MT-C5001, MT-E5000, MT-H9000, MT-ESP1000, MT-C5002, MT-4002 and HE3020-SG model.
-
Details
Learning kit for checking running gear on Industrial Vehicles
The MT-HD-30 is a simple and effective unit used to learn about how to check the key angles of...
-
Details
Learning kit for checking running gear on Agricultural Vehicles
The MT-HD-30-LM is a simple and effective unit used to learn about how to check the key angles of...
-
Details
Learning kit for checking running gear on light vehicles
The MT-HD-10 is a simple and effective unit used to learn about how to check the key angles of...
-
Details
Learning model for studying Electrical Power Steering
The MT-DAE model features an Electrical Power-Assisted Steering unit as fitted to PSA vehicles such as the C3. The...
-
Details
Learning chassis for studying and understanding the adjustment of...
The MT-TWINGO model provides all the adjustment options for the angles and distances which define a vehicle's running gear.
-
Details
Learning support: Controlling locking components
The DT-C004 module is a learning support which facilitates the study and understanding of the central door locking system....
-
Details
Learning support: Controlling d.c. motors
The DT-C001 module is a learning support which facilitates the observation and understanding of the operation of a d.c....
-
Details
Lighting and Signaling Modules, TRAILER Coupling device connector
Lighting and Signaling Modules, Coupling device connector (4 modules)
-
Details
Windscreen wiper modules
Windscreen wiper modules (5 modules)
-
Details
Lighting and Signaling Modules
Lighting and Signaling Modules (10 modules)
-
Details
Benchtop learning module: Measuring currents and voltages
Benchtop learning module for the basic of electricity: Measuring currents and voltages
-
Details
Benchtop learning module: Measuring steering wheel angle positions using...
The DT-M001 is a learning support which facilitates the study and measurement of steering wheel angle positions and features...
-
Details
Multiplexing benchtop learning module
Multiplexing benchtop learning module, CAN HS, LS and lIN multi-networks
-
Details
Study of Multiplexing Modules
Study of Multiplexing Modules (9 modules)
-
Details
CAN HS, LS and LIN networks model with directional...
Maquette compréhension réseaux CAN HS, LS et LIN avec feux xénon tournants
-
Details
Benchtop learning module: Controlling stepper motors
Support for learning about actuators: Controlling stepper motors: Idle air control valve actuator, Air recycling motor and Headlamp beam...
-
Details
Benchtop learning module: Engine control by PWM
Support for learning about actuators: Engine control by PWM: Electronic throttle control, Air control valve and EGR valve.
-
Details
Benchtop learning module: Control of injectors and ignition
Support for learning about actuators: Controlling piezo petrol and diesel injectors and ignition.
-
Details
Benchtop learning module: Measuring engine speed and crankshaft position
Benchtop learning module: Measuring engine speed and crankshaft position using an inductive sensor (fitted to the flywheel), a Hall-effect...
-
Details
Benchtop learning module: Measuring the characteristics of air
Benchtop learning module: Measuring the characteristics of air, air temperature sensor, air pressure sensor and air flow meter.
-
Details
Benchtop learning module: Measuring positions
Benchtop learning module for ride height, accelerator pedal and brake pedal position measuring sensors.
-
Details
Benchtop learning module: Measuring wheel speed
Benchtop learning module: Measuring wheel speed with a magnetoresistive sensor on an ABS wheel bearing
-
Details
Vehicle dashboard, CAN LS Human-Machine Interface
Vehicle dashboard, CAN LS Human-Machine Interface
-
Details
Electronic control unit: Data Processing – Analog/Digital Conversion
The module is used to study Analog/Digital conversion and illustrates the various stages in the processing of a signal:...
-
Details
SensoDrive Robotized Gearbox Model
The MT-BVR features a robotized gearbox as fitted to PSA vehicles such as the C3, 1007. The MT-BVR lets...
-
Details
Benchtop learming module for actuators: Study of Electric Fan...
The DT-C006 module facilitates the study of the management of engine cooling.
-
Details
Phased sequential petrol injection model with electronic throttle control
A phased sequential petrol injection learning model, based on a simulated TU 1.6L 16V petrol engine with electronic throttle...
-
Details
Diesel Common Rail Injection model
Learning model for a HDI diesel engine modelling a diesel turbine engine with common rail injection. The model has...
-
Details
12 V 10 A battery charger
Simple and quick to set up, pre-wired. Can be wall mounted or stood on a flat surface. The TCHA-P10A...
-
Details
24V 25A battery charger, 1 or 2 independent outputs
Simple and quick to set up, pre-wired. Can be wall mounted or stood on a flat surface. The TCHA-24V...
-
Details
Comparator for 2×12 volt batteries
Comparator for 2 x 12 volt batteries for vehicles with 24-volt systems. Verification of the balance between the batteries...
-
Details
Charging and start-up circuit tester, 24 V/1000 A
Charging and start-up circuit tester, 24 V 1000 A For vehicles with 24V systems, current measurement capability of up...
-
Details
Motor vehicle alternator benchtop learning module
“Motor vehicle alternator” benchtop leaning module: star or delta wiring arrangement, diode bridge setup
-
Details
Charging and Start-up model for 12V
The MT-4002V is a learning model developed to facilitate the study of automobile charging and start-up circuits (12V).
-
Details
ABS/ABR learning module
The DTP-ABS1000 facilitates the study of braking systems fitted with ABS (anti-lock braking system) and ABR (adaptive braking).
-
Details
3D vehicle stability control learning model : ABS, ASR,...
The MT-ESP1000 model has been developed to study a vehicle's stability control, braking and anti-skidding systems. This learning support...
-
Details
Training model for natural gas vehicle (NGV) systems
This learning model has been developed to facilitate training in natural gas systems fitted to NGV. The model is...
-
Details
Electrical protection equipment – UTE C18-550Electrical protection equipment –...
Collective and personal protective equipment which conforms with standard UTE C18-550 for Electric Vehicles/Hybrid Vehicles
-
Details
3D multimedia model for learning about HYBRID vehicles, with...
This learning model is exclusively dedicated to the study of hybrid technologies and provides a detailed explanation of the...
-
Details
Twizy instrumentation: Data logger and display unit
A logger which records data on the CAN (Controller Area Network) bus to assist with learning about the Renault...
-
Details
Fully electric vehicle, drivable and instrumented
The HE-3000 is the 1st electric vehicle to be developed as a learning aid. It is ideal for studying...
-
Details
Kit of HP and LP pressure sensors for the...
Kit of HP and LP pressure sensors for the HFO-1234yf refrigerant for use with EXXOCLIM3.
-
Details
A/C troubleshooting tool for R134a and HFO-1234yf circuits
An autonomous unit for troubleshooting automotive A/C circuits filled with R134a and HFO-1234yf. The EXXOCLIM3 unit can measure, check...
-
Details
Air conditioning system model featuring actual parts and systems...
The MT-C7001 model has been developed to facilitate the study and analysis of an automotive air conditioning system filled...
-
Details
Cooling system model featuring actual parts and systems (for...
The MT-C7000 model has been developed to facilitate the study and analysis of an automotive air conditioning system filled...
-
Details
3D air conditioning learning model
This EXXOTEST® model lets the user study an auto-regulated automotive air conditioning system. It features 3D simulation; which greatly...
-
Details
Air conditioning learning model
The MT-C5001 model has been developed to facilitate the study and analysis of an auto-regulated automotive air conditioning system.
-
Details
12V 25A high-frequency battery charger, 2 outputs
Simple and quick to set up, pre-wired. Can be wall mounted or stood on a flat surface. The TCHA-P25A...
-
Details
Multi-function digital tester
The CL550 is an exceptional multi-function digital tester which offers all of the following functions in one instrument: Oscilloscope,...
-
Details
Charging and start-up circuit tester, 12 V/500 A
The MI250S is used to check the charging, start-up and pre-heating circuits on a vehicle with 12V systems It...
-
Details
Breakdown boxes and interface cable harnesses – Light vehicle...
Breakdown boxes, interface cable harnesses and accessories applicable to light vehicles
-
Details
Multibrand diagnostics tool
Gutmann multibrand diagnostics tool.
15.6" TFT FULL HD touch screen, mains power supply and rechargeable battery integrated. -
Details
Range of LEARNING ENGINES for passenger vehicles
A range of Petrol and Diesel Learning Engines, on a mobile chassis, which meet the Euro5 and Euro6.2 emission...
-
Details
Breakdown boxes and cable harnesses – Motorcycle applications
Breakdown boxes, interface cable harnesses and accessories applicable to motorcycles
-
Details
Breakdown boxes and cable harnesses – Road transport and...
Breakdown boxes, interface cable harnesses and accessories applicable to road transport and agricultural vehicles
-
Details
Measurement-only breakout boxes for motorcycles
A range of measurement-only breakout boxes applicable to electronic motorcycle computers
-
Details
Measurement-only breakout boxes for light vehicles
A range of measurement-only breakout boxes applicable to the electronic control units of light vehicles