Exxotest

Package firmware for all EXXOTEST range (USB-MuxdiagII; USB-Muxdiag-2 (EVO); VCI-Muxdiag-3, USB-MUX-XXXX, DLO-MuxdiagII…)

Version 1.39 (2022/12)

Version required for the installation of EXXOTEST® VCI-MUXDIAG-3 peripheral on a PC-type computer equiped with a Windows 7 or later OS (32-bit and 64-bit versions).

Supported hardware:

Version 4.3.5 (2022/12/23)

Required kit for the developement of a Windows 7 or higher (32 and 64 bit versions) PC application associated to an EXXOTEST® VCI-MUXDIAG-3 interface.

Supported hardware:

Version 3.1. 6(2021/10/14)

PC app for Windows OS used to transfer the display from the CL550 or EXXOCLIM3 tool to the PC screen to which it is connected via USB.

Graphical post-processing PC app for Windows OS

Utility for updating via USB the firmware for EXXOTEST learning models and equipment. It is compatible with the updating of equipment loaded with a combination of firmware packages.

NB: After this tool is installed for the first time, the user must also download and install a firmware package

PC app for Windows OS used to acquire the measurements made using the REFLETSCOPE (REFLET8) unit and the models and equipment in the EXXOTEST range bearing the “REFLET” logo:

Version required for the installation of EXXOTEST “DIAGNOSTIC & MEASUREMENT” equipment: