Learning resources and supports developed to facilitate training in vehicle technologies digital systems
-
USB-Muxdiag-2 (Evo) Compact USB interface for CAN / LIN...
The USB-MUXDIAG-2 (Evo) is a compact communication interface which is particularly well suited to the vehicle environment.
-
USB/ETHERNET unit
The USB-MUX-4C4L unit is a 2nd generation USB unit belonging to the EXXOTEST® range of "Analysis tools for on-board...
-
Adjusting advanced driver assist systems
A professional multi-manufacturer solution for calibrating the various driver assist systems.
-
Smoke generator for the reliable identification of the location...
SLD-Tool provides reliable assistance in identifying the location of leaks from almost every vehicle system, including from within the...
-
TPMS diagnostic tool
The Tyre Pressure Management Tool, or "TPM-Tool", provides an attractively priced, compact and effective solution for garages in terms...
-
Multibrand diagnostics tool
Gutmann multi-manufacturer diagnostics tool. 10.4" TFT touch screen, mains power supply, integrated rechargeable battery.
-
5-channel relay test unit
For testing 5-channel relays with 6 mm terminals. Ideal for checking the control and power functions of the relay,...
-
Table on casters for Exxo-Modules type model
Table on casters for Exxo-Modules type model
-
Table on casters for EXXOTEST® model
Table on casters for MT-C5001, MT-E5000, MT-H9000, MT-ESP1000, MT-C5002, MT-4002 and HE3020-SG model.
-
Learning kit for checking running gear on light vehicles
The MT-HD-10 is a simple and effective unit used to learn about how to check the key angles of...
-
Learning model for studying Electrical Power Steering
The MT-DAE model features an Electrical Power-Assisted Steering unit as fitted to PSA vehicles such as the C3. The...
-
Learning support: Controlling locking components
The DT-C004 module is a learning support which facilitates the study and understanding of the central door locking system....
-
Learning support: Controlling d.c. motors
The DT-C001 module is a learning support which facilitates the observation and understanding of the operation of a d.c....
-
Lighting and Signaling Modules, TRAILER Coupling device connector
Lighting and Signaling Modules, Coupling device connector (4 modules)
-
Windscreen wiper modules
Windscreen wiper modules (5 modules)
-
Lighting and Signaling Modules
Lighting and Signaling Modules (10 modules)
-
Benchtop learning module: Measuring currents and voltages
Benchtop learning module for the basic of electricity: Measuring currents and voltages
-
Benchtop learning module: Measuring steering wheel angle positions using...
The DT-M001 is a learning support which facilitates the study and measurement of steering wheel angle positions and features...
-
Multiplexing benchtop learning module
Multiplexing benchtop learning module, CAN HS, LS and lIN multi-networks
-
Study of Multiplexing Modules
Study of Multiplexing Modules (9 modules)
-
CAN HS, LS and LIN networks model with directional...
Maquette compréhension réseaux CAN HS, LS et LIN avec feux xénon tournants
-
Benchtop learning module: Controlling stepper motors
Support for learning about actuators: Controlling stepper motors: Idle air control valve actuator, Air recycling motor and Headlamp beam...
-
Benchtop learning module: Engine control by PWM
Support for learning about actuators: Engine control by PWM: Electronic throttle control, Air control valve and EGR valve.
-
Benchtop learning module: Control of injectors and ignition
Support for learning about actuators: Controlling piezo petrol and diesel injectors and ignition.
-
Benchtop learning module: Measuring engine speed and crankshaft position
Benchtop learning module: Measuring engine speed and crankshaft position using an inductive sensor (fitted to the flywheel), a Hall-effect...
-
Benchtop learning module: Measuring the characteristics of air
Benchtop learning module: Measuring the characteristics of air, air temperature sensor, air pressure sensor and air flow meter.
-
Benchtop learning module: Measuring positions
Benchtop learning module for ride height, accelerator pedal and brake pedal position measuring sensors.
-
Benchtop learning module: Measuring wheel speed
Benchtop learning module: Measuring wheel speed with a magnetoresistive sensor on an ABS wheel bearing
-
Vehicle dashboard, CAN LS Human-Machine Interface
Vehicle dashboard, CAN LS Human-Machine Interface
-
Electronic control unit: Data Processing – Analog/Digital Conversion
The module is used to study Analog/Digital conversion and illustrates the various stages in the processing of a signal:...
-
SensoDrive Robotized Gearbox Model
The MT-BVR features a robotized gearbox as fitted to PSA vehicles such as the C3, 1007. The MT-BVR lets...
-
Benchtop learming module for actuators: Study of Electric Fan...
The DT-C006 module facilitates the study of the management of engine cooling.
-
Phased sequential petrol injection model with electronic throttle control
A phased sequential petrol injection learning model, based on a simulated TU 1.6L 16V petrol engine with electronic throttle...
-
Diesel Common Rail Injection model
Learning model for a HDI diesel engine modelling a diesel turbine engine with common rail injection. The model has...
-
12 V 10 A battery charger
Simple and quick to set up, pre-wired. Can be wall mounted or stood on a flat surface. The TCHA-P10A...
-
24V 25A battery charger, 1 or 2 independent outputs
Simple and quick to set up, pre-wired. Can be wall mounted or stood on a flat surface. The TCHA-24V...
-
Comparator for 2×12 volt batteries
Comparator for 2 x 12 volt batteries for vehicles with 24-volt systems. Verification of the balance between the batteries...
-
Charging and start-up circuit tester, 24 V/1000 A
Charging and start-up circuit tester, 24 V 1000 A For vehicles with 24V systems, current measurement capability of up...
-
Motor vehicle alternator benchtop learning module
“Motor vehicle alternator” benchtop leaning module: star or delta wiring arrangement, diode bridge setup
-
ABS/ABR learning module
The DTP-ABS1000 facilitates the study of braking systems fitted with ABS (anti-lock braking system) and ABR (adaptive braking).
-
3D vehicle stability control learning model : ABS, ASR,...
The MT-ESP1000 model has been developed to study a vehicle's stability control, braking and anti-skidding systems. This learning support...
-
Training model for natural gas vehicle (NGV) systems
This learning model has been developed to facilitate training in natural gas systems fitted to NGV. The model is...
-
Electrical protection equipment – UTE C18-550Electrical protection equipment –...
Collective and personal protective equipment which conforms with standard UTE C18-550 for Electric Vehicles/Hybrid Vehicles
-
3D multimedia model for learning about HYBRID vehicles, with...
This learning model is exclusively dedicated to the study of hybrid technologies and provides a detailed explanation of the...
-
Twizy instrumentation: Data logger and display unit
A logger which records data on the CAN (Controller Area Network) bus to assist with learning about the Renault...
-
Fully electric vehicle, drivable and instrumented
The HE-3000 is the 1st electric vehicle to be developed as a learning aid. It is ideal for studying...
-
Kit of HP and LP pressure sensors for the...
Kit of HP and LP pressure sensors for the HFO-1234yf refrigerant for use with EXXOCLIM3.
-
A/C troubleshooting tool for R134a and HFO-1234yf circuits
An autonomous unit for troubleshooting automotive A/C circuits filled with R134a and HFO-1234yf. The EXXOCLIM3 unit can measure, check...
-
Air conditioning system model featuring actual parts and systems...
The MT-C7001 model has been developed to facilitate the study and analysis of an automotive air conditioning system filled...
-
Cooling system model featuring actual parts and systems (for...
The MT-C7000 model has been developed to facilitate the study and analysis of an automotive air conditioning system filled...
-
3D air conditioning learning model
This EXXOTEST® model lets the user study an auto-regulated automotive air conditioning system. It features 3D simulation; which greatly...
-
Air conditioning learning model
The MT-C5001 model has been developed to facilitate the study and analysis of an auto-regulated automotive air conditioning system.
-
Multibrand diagnostics tool
Gutmann multibrand diagnostics tool.
15.6" TFT FULL HD touch screen, mains power supply and rechargeable battery integrated.