-
Software for viewing and analysing electrical signals.
REFLET is a simple and user-friendly app used to view and analyse electrical signals.
-
Measurement acquisition system
REFLET8 can simultaneous acquire data from 12 slow channels and 4 fast channels.
It is used in conjunction with... -
5-channel relay test unit
For testing 5-channel relays with 6 mm terminals. Ideal for checking the control and power functions of the relay,...
-
Table on casters for Exxo-Modules type model
Table on casters for Exxo-Modules type model
-
Table on casters for EXXOTEST® model
Table on casters for MT-C5001, MT-E5000, MT-H9000, MT-ESP1000, MT-C5002, MT-4002 and HE3020-SG model.
-
Learning kit for checking running gear on Agricultural Vehicles
The MT-HD-30-LM is a simple and effective unit used to learn about how to check the key angles of...
-
Learning model for studying Electrical Power Steering
The MT-DAE model features an Electrical Power-Assisted Steering unit as fitted to PSA vehicles such as the C3. The...
-
Learning support: Controlling locking components
The DT-C004 module is a learning support which facilitates the study and understanding of the central door locking system....
-
Learning support: Controlling d.c. motors
The DT-C001 module is a learning support which facilitates the observation and understanding of the operation of a d.c....
-
Windscreen wiper modules
Windscreen wiper modules (5 modules)
-
Lighting and Signaling Modules
Lighting and Signaling Modules (10 modules)
-
Benchtop learning module: Measuring currents and voltages
Benchtop learning module for the basic of electricity: Measuring currents and voltages
-
Benchtop learning module: Measuring steering wheel angle positions using...
The DT-M001 is a learning support which facilitates the study and measurement of steering wheel angle positions and features...
-
Study of Multiplexing Modules
Study of Multiplexing Modules (9 modules)
-
CAN HS, LS and LIN networks model with directional...
Maquette compréhension réseaux CAN HS, LS et LIN avec feux xénon tournants
-
Benchtop learning module: Controlling stepper motors
Support for learning about actuators: Controlling stepper motors: Idle air control valve actuator, Air recycling motor and Headlamp beam...
-
Benchtop learning module: Engine control by PWM
Support for learning about actuators: Engine control by PWM: Electronic throttle control, Air control valve and EGR valve.
-
Benchtop learning module: Control of injectors and ignition
Support for learning about actuators: Controlling piezo petrol and diesel injectors and ignition.
-
Benchtop learning module: Measuring engine speed and crankshaft position
Benchtop learning module: Measuring engine speed and crankshaft position using an inductive sensor (fitted to the flywheel), a Hall-effect...
-
Benchtop learning module: Measuring the characteristics of air
Benchtop learning module: Measuring the characteristics of air, air temperature sensor, air pressure sensor and air flow meter.
-
Benchtop learning module: Measuring positions
Benchtop learning module for ride height, accelerator pedal and brake pedal position measuring sensors.
-
Benchtop learning module: Measuring wheel speed
Benchtop learning module: Measuring wheel speed with a magnetoresistive sensor on an ABS wheel bearing
-
Electronic control unit: Data Processing – Analog/Digital Conversion
The module is used to study Analog/Digital conversion and illustrates the various stages in the processing of a signal:...
-
SensoDrive Robotized Gearbox Model
The MT-BVR features a robotized gearbox as fitted to PSA vehicles such as the C3, 1007. The MT-BVR lets...
-
Diesel Common Rail Injection model
Learning model for a HDI diesel engine modelling a diesel turbine engine with common rail injection. The model has...
-
Motor vehicle alternator benchtop learning module
“Motor vehicle alternator” benchtop leaning module: star or delta wiring arrangement, diode bridge setup
-
Charging and Start-up model for 12V
The MT-4002V is a learning model developed to facilitate the study of automobile charging and start-up circuits (12V).
-
Kit of HP and LP pressure sensors for the...
Kit of HP and LP pressure sensors for the HFO-1234yf refrigerant for use with EXXOCLIM3.
-
A/C troubleshooting tool for R134a and HFO-1234yf circuits
An autonomous unit for troubleshooting automotive A/C circuits filled with R134a and HFO-1234yf. The EXXOCLIM3 unit can measure, check...
-
Air conditioning system model featuring actual parts and systems...
The MT-C7001 model has been developed to facilitate the study and analysis of an automotive air conditioning system filled...
-
Cooling system model featuring actual parts and systems (for...
The MT-C7000 model has been developed to facilitate the study and analysis of an automotive air conditioning system filled...
-
3D air conditioning learning model
This EXXOTEST® model lets the user study an auto-regulated automotive air conditioning system. It features 3D simulation; which greatly...
-
Air conditioning learning model
The MT-C5001 model has been developed to facilitate the study and analysis of an auto-regulated automotive air conditioning system.
-
12V 25A high-frequency battery charger, 2 outputs
Simple and quick to set up, pre-wired. Can be wall mounted or stood on a flat surface. The TCHA-P25A...
-
Charging and start-up circuit tester, 12 V/500 A
The MI250S is used to check the charging, start-up and pre-heating circuits on a vehicle with 12V systems It...
-
Breakdown boxes and cable harnesses – Road transport and...
Breakdown boxes, interface cable harnesses and accessories applicable to road transport and agricultural vehicles